4x4Wire Discussions

Featuring news and information about OHV recreation and environment issues around the nation. (Site registration required to post)

Discussions tagged hood movement,“ hood flutter ”.,hood latch

Daystar Hood Wrangler Install

{loadposition ads_in_article} Knowing the nut size is a good start.  After a few minutes of fumbling around, I determined it was a 13 mm nut. The challenge was getting a wrench fitted on the nut.  As noted, access is tight.  I was able to slip a 1/4 inch socket wrench between the f...
  • Page :
  • 1
4x4Wire.com

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.