Install the locking hub body.

[Linked Image]

Install the circlip to the end of the axle. PLEASE NOTE that it only goes on one way. There is a flat and rounded side to the circlip. It's been a while since I did this, but if I remember correctly, the flat side faces out toward you.

[Linked Image]

If you take apart the locking mechanism, PLEASE note that there is a little detent ball and spring. DON'T lose them!

[Linked Image]

Reinstall the locking hub mechanism, and you're nearly done.


Curt Shambeau
87 Mitsubishi Montero SWB (Turbo G64b wideblock conversion soon)