Thanks for the support <img src="/forums/images/graemlins/kewl.gif" alt="" />
By "cal tag" do you mean the plate under the hood or sticker on the door jam or something like that?

If they don't happen to be the same gears would the ring and pinion from my open diff bolt up?
There doesn't seem to be any problems with the rear now just would rather have the LSD. Changed the pinion seal over the weekend and wanted to put new sealant on the 3rd member too is why I was pulling axle shafts..

Yeah, I did take the nuts off the backing plate. Probably was never apart before and my little slide hammer wasn't cutting it. Tried heating where the nuts came off from with propane torch some too, still didn't budge.
The big chain sounds like a good idea I'll have to try that next time.


1990 LWB RS A/T
1990 LWB Base A/T
1991 LWB LS A/T Going...Going...