Originally Posted by TOASTY

Could you get an electronic to cable interface from Dakota? I had looked into this for installing a JK NP241OR into a Gen 1, basically it takes signal from the VSS and you calibrate the module to spin the cable the correct RPM.

Interesting approach I had not considered. Not sure what is needed to mate to furrin cables and at that price I would have bought another Gen 2 Xcase to swap out the Gen 3 one.


Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.