The one that works for the ECU.. it's the front facing one correct ? 2 wire facing up is for the A/C... 1 wire smaller ones are the dummy light and gauge correct ? What's the thread size for this sensor ?
I read the newer ones use M12x1.5 or the 3/8 NPT... But think I seen the one I have ( 1990 3.0 v6 ) has M12x1.25 ? I am in need of the ECU sensre or make one from another vehicle work.
91 (Gen1) Monty, 3.0L V6, Auto 4 Door. Disabled Driver.
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.