so I found the right lines !!!!

First I opened everything up .. and had a look .

[Linked Image]

I realized my previous "hanging " of the rear line was no good , so I started with moving the rear upper hanger .

[Linked Image]

[Linked Image]

welded , and re-bent the line .. I also added some posts for the line to bolt to ...

[Linked Image]

so with the line now loosly fit ..

[Linked Image]


I wanted to make the brackets fit my supports .. so I removed the crimping from the new lines , and started cutting and forming and fitting

[Linked Image]

and now a perfect fit .. and re-crimped back onto the lines ...

[Linked Image]

here in BC .. brake lines also must be supported with a bracket , and "C" clip ..

so I made some brackets ..

[Linked Image]

welded and "C" clipped

[Linked Image]


and used the "domestic ends , and a small piece of line with the original ends on it .. double flared the ends , and done .

[Linked Image]


.


86 4x4 , fiberglass bed , 1/2 doors , hood, etc..
84 Custom 2WD 400HP supra suspension , full frame
83 Trekker SR5
NEW Trekker forum