Quote
Must be the angle of the pictures as it appears the bezel is crooked?


so as it turns out ... it was crooked .
I guess from my pulling it in and out of the truck with the suports cut out , bent it .
the whole left lower section was "bent" over about 1/2 inch . once its bolted in the truck , should be good .


[Linked Image]


.


86 4x4 , fiberglass bed , 1/2 doors , hood, etc..
84 Custom 2WD 400HP supra suspension , full frame
83 Trekker SR5
NEW Trekker forum