so it finally "cooled" down to 33* C (90*F) outside ... and was able to get some work done ..

as mentioned .. I decided to change the dash again .. so I welded up the clock , hazard, and dimmer hole .. and cut the NEW gauge holes .

[Linked Image]

the frame of the dash had also been butchered by the previous owner ..

[Linked Image]

so I cleaned it up , and started to make some new supports . I have more to do , to get the sterio supported .. but I wanted to make sure everything was going to be ok before I did all the work .

[Linked Image]

also , now had to RE-mount the heater controls
[Linked Image]

so , now I'm happy ....

[Linked Image]

and "installed"

[Linked Image]



.


86 4x4 , fiberglass bed , 1/2 doors , hood, etc..
84 Custom 2WD 400HP supra suspension , full frame
83 Trekker SR5
NEW Trekker forum