little bit done today <img src="/forums/images/graemlins/wink.gif" alt="" />

started on the frame to support the tub , and tie into the roll bar and seat belts
started with building the main supports .. and yes the tops are NOT level . This is due to the uneven fiberglass floor .

[Linked Image]

ready to go (4 built )

[Linked Image]

starting to "piece" it all together
drivers side

[Linked Image]

passenger side is different , because of the fuel filler tube .. had to be routed over top .

[Linked Image]

all sectioned together and ends plugged ...
I have too very strong mounts

[Linked Image]

and mounted

[Linked Image]

still have to build the cross bars ... But it will have to wait till after I pull the tube off for rienforcing ..

the glass will add to the thickness of the tub , so I cant build the final floor support untill the tub is done ..



.


86 4x4 , fiberglass bed , 1/2 doors , hood, etc..
84 Custom 2WD 400HP supra suspension , full frame
83 Trekker SR5
NEW Trekker forum