Wheel spacers move the wheels out from their original mounting width by placing a piece of thick metal in between where the wheel mounts and the back side of the wheel. This creates a longer axle so there might not be the rubbing if enough space was added.

By either relocating the pan hard mount at the frame down or lengthening it out by replacing it with a longer piece you can re-center the axle to have it articulate either way without contact.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />


White 1998 4 door KIA Sportage 4x4 w/Eibach 2.5 spring lift and TJ rear coils, 4crawler 1.5 body lift, Monroe Sensa.trac shocks, Bosch 4+ plugs, Eaton LSD, 31x10.5x15 BFG KM tires, 2.5 cat back exhaust w/SpinTech muffler