Hi Guys,
I have a 2dr Sportage (the SWB) and a couple of questions.
I've installed TJ springs in the back with KYB shocks but I wasn't able to fit the 2" spacers in the front, I wasn't able to close the 4 bolts on the strut's mount.
Could someone please write the instructions to the installation? Do I need to remove the lower control arm?

In addition, after lifting the rear, the car started to vibrate at about 20 mph and it only stops at about 50mph, I figured it's because the new angel of the driveshaft. Did anyone came across this problem? What are my options?
I thought about dropping the transfer-case a bit, but on one side it's "sitting" on a bracket that is welded to the chassis, any ideas?
Thanks,
Lior