these pictures are not very good, but.......
the new steering box will probably bolt up once i cut away some mangled steel. it's larger in several ways than the original.
poor suzi had been impaled on something(before i got her) that had folded the frame/body mount over the steering box. i had yanked, butchered, hammered, and welded enough to make her look ok, but i need to remove some more mangled metal before the new box will fit in there.
this whole corner is still "in" about 1 1/2"- see the ripple in the inside fender?
anyway, i'm notching it out to fit the box. i figure a couple of more grinding discs.
i'm still not sure how i'm gonna deal with this:
that flat belt pulley seems to be a pressed on thing.
i want a v belt pulley to ribbed belt pulley adapter.