i pulled suzi's header to install a sensor bung in the collector.
bought a cool bit that made the hole easy.
then i sparked the bung on.
naturally, the threads on the supplied plug stayed in the bung, but i think it may clean out with a spark plug chaser after i go buy one.........
i'm optomistic and used some header paint to hide any other defects.
i picked up a gasket(felpro "new and improved") and some studs, nuts and bolts for the refit.
i'll drink a beer and watch the paint dry.
here's a bad pic of the plug. i must have overheated the bung/plug.
i had to put this header somewhere 'till i get the chaser, so i hung it on the head.
i had to pick a color. i wonder how long this will last.
i think it'll look cool.
used an 18mm sparkplug tap. didn't totally blow it(there's still time).
couple more hours to test time.
that'll be mabe next week.