Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Search E-Bay for your parts:
Search Amazon for your parts:

Search

Recent Posts on TrailTalk
1989 LWB A/T Temp Light
by chadzeilenga. 08/21/18 05:51 AM
1989 GEN1 Water Pump Inlet
by chadzeilenga. 08/21/18 05:38 AM
Gen 2 Auto Trans Removal
by rxinhed. 08/18/18 12:58 AM
Replace cracked manifold with Pacesetter header?
by GrantCee. 08/17/18 10:47 PM
Help with hard-to-find part for Gen1
by GrantCee. 08/15/18 05:35 AM
suzi the psychic
by rascott. 08/12/18 06:11 PM
GEN1 LWB Radio reception
by chadzeilenga. 08/12/18 06:03 AM
Support 4x4Wire
New Topics on TrailTalk
Gen 2 Auto Trans Removal
by tdf46. 08/17/18 12:12 AM
1989 GEN1 Water Pump Inlet
by chadzeilenga. 08/16/18 01:14 PM
Replace cracked manifold with Pacesetter header?
by GrantCee. 08/14/18 06:13 PM
Another 3.0L High Idle.. :)
by chadzeilenga. 08/10/18 05:42 PM
ISO Gen II SR rear locker
by OConnor. 08/06/18 02:38 AM
24 VLA's for a hundred and ten bucks!
by marksroberts61. 08/02/18 11:33 PM
4x4 Gallery
Scar the Cylon Raider
Mercenary Sergeant: Code Name "Sapphire"
Flex test after suspension mods
Clearance check!
Testing the new Kenda Klever 31x10.50x15
More News on the 'Wire

4x4Voice
4x4Wire
MUIRNet-News
OutdoorWire
Who's Online Now
0 registered members (), 114 guests, and 6 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums37
Topics137,902
Posts1,079,595
Members14,783
Most Online581
Apr 3rd, 2017
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 5 1 2 3 4 5
Re: SAAS SPORTS STEERING WHEEL [Re: bombardj1] #1058050
08/09/15 01:26 PM
08/09/15 01:26 PM
4
4runnernomore  Offline OP
Mudrunner
Joined: Jul 2007
Posts: 383
Darwin Australia
I think it was just the angle of the photo.

Will have a closer look tomorrow,haven't really noticed it before and post up a photo of the SAAS steering wheel.

Cheers, Chris <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
Support our sponsors
Re: SAAS SPORTS STEERING WHEEL [Re: 4runnernomore] #1058051
08/14/15 09:41 AM
08/14/15 09:41 AM
4
4runnernomore  Offline OP
Mudrunner
Joined: Jul 2007
Posts: 383
Darwin Australia
Quote
I think it was just the angle of the photo.

Will have a closer look tomorrow,haven't really noticed it before:


All good, mine sits nice and flat, it was the angle of the photo : <img src="/forums/images/graemlins/kewl.gif" alt="" />

PHOTO'S

[Linked Image]

[Linked Image]

Looks and feels great. Nice to hold and the steering is now more precise.

Cheers, Chris <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
EXTRACTOR'S WILDCAT [Re: 4runnernomore] #1058052
08/20/15 09:05 AM
08/20/15 09:05 AM
4
4runnernomore  Offline OP
Mudrunner
Joined: Jul 2007
Posts: 383
Darwin Australia
Finally ceramic coated goodness.

My Wild cat extractors, coated ready to be installed.

Now just need more fun tickets for the rest of the system.

[Linked Image]

[Linked Image]

Cheers, Chris


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
Re: Out driving "L" [Re: 4runnernomore] #1058053
08/22/15 10:56 AM
08/22/15 10:56 AM
4
4runnernomore  Offline OP
Mudrunner
Joined: Jul 2007
Posts: 383
Darwin Australia
Had my son out on a driving lesson and a side track was to irresistible to pass up.

[Linked Image]

As usual photos don't do justice. The step up was around a 1/2 meter high. Rear tyre was just off the ground.

CheersChris <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
Re: Out driving "L" [Re: 4runnernomore] #1058054
08/30/15 01:32 AM
08/30/15 01:32 AM
Sportege_Panicmech  Offline
Mudrunner
Joined: Dec 2009
Posts: 433
Cda, Idaho
Hey guys! It's been a LONG time! thought i'd stop in and see whats happening. Still seeing a few familiar names in here still. 4runnernomore, your sportage is looking excellent!! Can I have your snorkel? Also wish I could have some AU clear front corner lenses. They aren't available in the USA. <img src="/forums/images/graemlins/lol.gif" alt="" />
Everett still here I see <img src="/forums/images/graemlins/cyclops.gif" alt="" />
My Sportage has come a long way also. Lift, cylinders bored 50 over, port/polished head and intake, and machined out the throttle body. bunch of here's and theres. Anyway.. HI EVERYONE!!

Attached Files
1299615-boss.jpg (7 downloads)
Re: EXTRACTOR'S WILDCAT [Re: 4runnernomore] #1079268
10/11/15 02:43 AM
10/11/15 02:43 AM
Dave Scott  Offline
Trail Leader
Joined: Aug 2001
Posts: 5,527
san antonio, TX
Originally Posted by 4runnernomore
Finally ceramic coated goodness.

My Wild cat extractors, coated ready to be installed.

Now just need more fun tickets for the rest of the system.

[Linked Image]



[Linked Image]



Cheers, Chris


Ok, I want this. I know it's not going to be legal running it in the US unless I still have 2 cats. I think it will boost HP and torque regardless. I will run 2 generic hi flow cats after it and rewire so the O2 sensors can reach. Will wildcat sell it to me? Seen it on eBay Australia. If I order it, I will get it, right? It's $320 USD, that's why I ask. That's a little rich for me. And running 2 cats after, with the O2 sensors in the right places should get me smogged correctly, shouldn't it? Now, they don't normally check your tailpipe in TX, but, I just want to make sure I don't fail in case they do.

Last edited by Dave Scott; 10/11/15 02:46 AM.

95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD
CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift

http://www.cardomain.com/ride/341410
Re: EXTRACTOR'S WILDCAT [Re: Dave Scott] #1079271
10/11/15 04:58 AM
10/11/15 04:58 AM
4
4runnernomore  Offline OP
Mudrunner
Joined: Jul 2007
Posts: 383
Darwin Australia
Dave, I bought mine online from Best mufflers based in Sydney. Contacted them direct. Here is there site https://www.bestmufflers.com/bshop/...;osCsid=c18d9b4a5529b4b0ac4a2527b354f784

I found them very helpful.

If no joy Genie Australia manufacture the wildcat brand. Try contacting them if you have no joy with the online guys.

I can't see why it wouldn't pass your EPA as it still has the 02 sensor position and running performance cats best of both worlds, legal and more horses.

Cheers, Chris


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
Re: EXTRACTOR'S WILDCAT [Re: 4runnernomore] #1079272
10/11/15 02:32 PM
10/11/15 02:32 PM
Dave Scott  Offline
Trail Leader
Joined: Aug 2001
Posts: 5,527
san antonio, TX
Well, because mine is a 2000 model with the pre-cat. The first O2 sensor is after the pre-cat, so it's sensing exhaust that has been catalyzed once already. So, first things first, I'd have to cap that O2 sensor bung and put my first one in the exhaust pipe after my first hi-flow cat.


95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD
CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift

http://www.cardomain.com/ride/341410
Re: EXTRACTOR'S WILDCAT [Re: 4runnernomore] #1080600
05/07/16 03:17 PM
05/07/16 03:17 PM
4
4runnernomore  Offline OP
Mudrunner
Joined: Jul 2007
Posts: 383
Darwin Australia
Been a busy couple of months. Had my Sporty off the road having a full cooling system replacement.

Whilst it was all pulled part I finally fitted my 1 3/8 body lift and new body mount rubbers. WHAT A MISSION this ended up been. I did not have enough thread exposed after fitting the body lift so had to order bolt extensions. These ended uP been slightly to long on the shank and I could not tighten uP properly so had to get some additional spacers made up. Will post pics up later.

I also still need to finalise the centre console mods to allow the transfer case lever to be able to shift into 4wd. It never ends.

Drove it home today from the BIL's place nearly all done. Car is drivable but Still have some more finishing bits to do to finalise the body lift. The rear bumper has been raised and installed properly. Pretty happy with the end result. Need to make some new brackets for the rear upper mugs guards and I am waiting on some new fittings to come in from the stealership. That should finish the rear.

I purchased a winch bulbar off runt 303 a while ago and tried to fit it up the other night. I don't know if he had some chassis mods done or there was a major difference between the front chassis Of the 97 to a post 2000 model with airbags but there was no way it would bolt up. So
I am running with out a front bumper at the moment. Will need to see if
I can get new brackets made up to fit the bar.

When I get some time I will be collating my experience into my other thread for the body lift on what needed to be done so others can learn and hopefully be better informed if they decide to complete a body lift.

Cheers, Chris


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
Re: EXTRACTOR'S WILDCAT [Re: 4runnernomore] #1101913
08/18/16 10:27 PM
08/18/16 10:27 PM
K
Kiamad  Offline
Need a Spot
Joined: May 2016
Posts: 4
New Zealand
Hey Chris, first off, loving the build, looks good :-)
Secondly, I'd love to know a bit more about your suspension lift and have a couple questions answered, would you maybe be able to pm me?
Cheers, Desmond


'96 Sporty: stripped interior, bogan snorkel, nissan safari bullbar. Say what you want, shes my baby and I love her :-)
Page 3 of 5 1 2 3 4 5

Moderated by  Axe Man, DamKia 

OutdoorWire Websites

OutdoorWire

OutdoorWire

Portal page for OutdoorWire Access and Landuse Central Read More
4x4Voice

4x4Voice

California off road recreation news and information Read More
MUIRNet News

MUIRNet News

News and information about issues affecting outdoor recreation Read More
4x4Wire

4x4Wire

Off road recreation and 4x4 Technical news and information Read More
TrailTalk

TrailTalk

4x4Wire TrailTalk Forums for a variety of 4x4 tech information Read More

4x4Wire Tech Section

Jeep 4x4 Tech

Jeep 4x4 Tech

Jeep Tech from JeepWire - Mods, Maintenance, Tech and more... Read More
Isuzu 4x4 Tech

Isuzu 4x4 Tech

Isuzu Tech from 4x4Wire - Mods, Maintenance, Tech and more... Read More






4x4Wire Social:

| 4x4Wire on FaceBook | Google+4x4Wire on Google+|


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2017 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Page Time: 0.012s Queries: 16 (0.005s) Memory: 1.0735 MB (Peak: 1.2128 MB) Zlib disabled. Server Time: 2018-08-21 14:14:47 UTC