Tracked down a Y pipe for my 1989 from a 1990 3.0 v6 Automatic in CA........also needed EGR pipe but curiously this drivers side exhaust manifold didn't have the EGR pipe Flange to the Plenum.
Photo 1 is the No EGR manifold from the 1990 Photo 2 Is what should look like for 1989 or 1990 v6 Photo 3 is the model it was pulled from
I've never seen any mention of another Gen I 3.0 v6 version without EGR on the manifold in my manuals or the Raider parts catalog 4x4 pdf
Anybody seen mention of this? Was this a CA Emissions specific version??
Last edited by polar; 11/09/1906:22 PM.
Support our sponsors
Re: 1990 Montero V6 No EGR Pipe Off Exhaust Manifold?
[Re: polar]
#110533111/09/1911:59 PM
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.