|
0 registered members (),
124
guests, and 6
spiders. |
|
Key:
Admin,
Global Mod,
Mod
|
|
Forums37
Topics138,146
Posts1,080,836
Members15,113
| |
Most Online907
Dec 28th, 2019
|
|
 Re: front end noise
[Re: budicexxx]
#960259
09/07/09 01:34 PM
|
Joined: Dec 2007
Posts: 316
Mudrunner
|
Do I need to separate the hub and rotor from the knuckle?
2001 Sportage, TJ 106's, Everet spacers and bumpstops, Bilstein shocks on the rear, cone filter, Crager wheels, 235-75-15 Goodyear tires. Custom front winch bumper by Dave Scott. Currently DOA, but it is a work in progress.
2011 Kia Forte EX
|
|
|
Re: front end noise
[Re: homerdog]
#960260
09/07/09 07:16 PM
|
Joined: Dec 2007
Posts: 316
Mudrunner
|
Any suggestions on getting the nut off the control arm?
2001 Sportage, TJ 106's, Everet spacers and bumpstops, Bilstein shocks on the rear, cone filter, Crager wheels, 235-75-15 Goodyear tires. Custom front winch bumper by Dave Scott. Currently DOA, but it is a work in progress.
2011 Kia Forte EX
|
|
|
Re: front end noise
[Re: homerdog]
#960261
09/07/09 09:33 PM
|
Joined: Dec 2007
Posts: 316
Mudrunner
|
Any suggestions on how to get the remains of the bearing out?
2001 Sportage, TJ 106's, Everet spacers and bumpstops, Bilstein shocks on the rear, cone filter, Crager wheels, 235-75-15 Goodyear tires. Custom front winch bumper by Dave Scott. Currently DOA, but it is a work in progress.
2011 Kia Forte EX
|
|
|
Re: front end noise
[Re: homerdog]
#960262
09/07/09 09:38 PM
|
Joined: Feb 2008
Posts: 244
OP
Wheeler
|
i used a flat csrew driver that i hit with a file to make it have a better edge to get between the wall and bearing race and go around it all the way then cut it in half poped right out.
01 w/31 in. mtr,winch,elec.fan ,4 in.suspension lift and 4in. body lift,front and rear hitch. NOT ENOUGH POWER so V8 and solid axles coming soon.2013
|
|
|
Re: front end noise
[Re: jays2001]
#960263
09/07/09 09:41 PM
|
Joined: Dec 2007
Posts: 316
Mudrunner
|
I'll try that, been using a chisel and no luck, been at it for 5 hours now trying to get the thing fixed and the bearing wasn't in that bad of shape so it's probably something else.
Last edited by homerdog; 09/07/09 09:42 PM.
|
|
|
Re: front end noise
[Re: homerdog]
#960264
09/07/09 11:12 PM
|
Joined: Dec 2007
Posts: 316
Mudrunner
|
oh well, that was a waste of a perfectly good afternoon
2001 Sportage, TJ 106's, Everet spacers and bumpstops, Bilstein shocks on the rear, cone filter, Crager wheels, 235-75-15 Goodyear tires. Custom front winch bumper by Dave Scott. Currently DOA, but it is a work in progress.
2011 Kia Forte EX
|
|
|
Re: front end noise
[Re: homerdog]
#960265
09/08/09 12:02 AM
|
|
Anonymous
Unregistered
|
your needle bearing was in good shape?
Remeber there is another one...lol
Last edited by openskys; 09/08/09 12:03 AM.
|
|
|
Re: front end noise
#960266
09/08/09 12:36 AM
|
Joined: May 2009
Posts: 89
Getting the Wheeling Fever
|
There is no need to remove the tie rod. I didnt and for the race of the bearings one of the bearing has a bigger lip than the other knock that one out first with a hammer and a punch then have some one smooth sailing for the other one. The needle bearing i tapped it with a sharp chisel and it broke right out.
2001 sporty, tj rear springs with rav4 shocks, ford alloys machined centers with 30x9.5x15, front spacers. more upgrades to come.
|
|
|
Re: front end noise
#960267
09/08/09 01:02 AM
|
Joined: Dec 2007
Posts: 316
Mudrunner
|
Thing is that I can lock in the right side and hear the noise. If I lock in just the left side I don't hear it. Sounds like I'm hitting a speed bump. Maybe the halfaxle is shot, I'll try that next, it's got a tear in the boot anyways.
2001 Sportage, TJ 106's, Everet spacers and bumpstops, Bilstein shocks on the rear, cone filter, Crager wheels, 235-75-15 Goodyear tires. Custom front winch bumper by Dave Scott. Currently DOA, but it is a work in progress.
2011 Kia Forte EX
|
|
|
Re: front end noise
[Re: homerdog]
#960268
09/08/09 01:35 AM
|
Joined: Feb 2008
Posts: 244
OP
Wheeler
|
that was the samething with mine and it was the needle bearing
01 w/31 in. mtr,winch,elec.fan ,4 in.suspension lift and 4in. body lift,front and rear hitch. NOT ENOUGH POWER so V8 and solid axles coming soon.2013
|
|
|
