4x4Wire TrailTalk

Weber 22R Carb Tech

Posted By: kewlynx

Weber 22R Carb Tech - 11/11/08 05:03 AM

Yepper. For you **22R** Weber-heads out there. Here's your archival thread, or better yet, write an article for the 4x4portal!!

http://www.4x4wire.com/index.php?op...w=section&id=3&Itemid=74
Posted By: yodta

Re: Weber carb tech - 11/11/08 05:06 AM

nice!
I'll see if I can get my old photos together in my "spare" time smile
Posted By: kewlynx

Re: Weber 22R Carb Tech - 11/11/08 06:46 AM

Ver' cool; we've been needing this for awhile. Scerb's website for Aisins is pretty schweet. Miss Josh around here...HEY JOSH!!!
Posted By: ArbitraryNotion

Re: Weber 22R Carb Tech - 02/04/09 01:47 AM

I miss stopping around. What kind of info are you looking for? <img src="/forums/images/graemlins/cheers.gif" alt="" />
Posted By: kewlynx

Re: Weber 22R Carb Tech - 02/04/09 02:09 AM

Anything you want to contribute- there's enough Weber Q.s around; would be nice to have a repository or a tech article (the boss might send ya a shirt)

Great to see you're still around Josh!! <img src="/forums/images/graemlins/cheers.gif" alt="" />
Posted By: gueroblanco

Re: Weber 22R Carb Tech - 09/13/09 03:20 AM

maybe I should post any questions in here...
Posted By: idhank

Re: Weber 22R Carb Tech - 10/04/09 10:45 PM

Is there anybody out there that can give me an idea of what I can do to my Weber carburetor to get it pass emission here in Idaho what I have is an 1980 4 x 4 pickup with a 1982 22 R motor and a Weber 32/36 carburetor that doesn't want to pass emission at idle for hydro carbons. Any help would be greatly appreciated.

Thanks Idhank
Posted By: Ralph

Re: Weber 22R Carb Tech - 10/05/09 11:04 AM

Mix 1 part gas to 2 parts Alcohol.

This works in California.
Posted By: XJCreeper

Re: Weber 22R Carb Tech - 02/06/10 11:00 AM

Quote
Is there anybody out there that can give me an idea of what I can do to my Weber carburetor to get it pass emission here in Idaho what I have is an 1980 4 x 4 pickup with a 1982 22 R motor and a Weber 32/36 carburetor that doesn't want to pass emission at idle for hydro carbons. Any help would be greatly appreciated.

Thanks Idhank


I don't have a Weber, but the process should be similar to the FSM one I've been using with the stock carb:
Get a timing light, pull off and plug the vacuum advance on the distrubutor off, and check and dial in the timing. Timing is usually been the root off my not passign emissions.

Next get a tach on the motor and dial in the idle and fuel mixture. This can be accomplished by uping the idle and leaning out the mixture till ya hear the valves get a bit noisy. Then checking the tach slowly making it richer until the idle doesn't go up anymore. Then set the idle and head to the smog shop.

I go through this with my carb'd motor every so often through the smog check. My carb must be getting it screws loose or something after a while <img src="/forums/images/graemlins/lol.gif" alt="" />
Posted By: ArbitraryNotion

Re: Weber 22R Carb Tech - 10/31/11 06:37 PM

Here's a quick Weber gem:

Ditch the stock fuel pump. When I converted to a Carter 4070 electric fuel pump the truck ran so much better. I've now been using one for several years and it was well worth the $100. I bolted my to the passenger side of the cab right next to the fuel lines so I could just add it inline. LCEngineering sells a fuel pump blockoff plate so the pump can just go away.

If I had to do it again I would have installed it near the fuel filter so I didn't have to listen to the pump because it is loud! <img src="/forums/images/graemlins/cheers.gif" alt="" />
Posted By: 4Crawler

Re: Weber 22R Carb Tech - 11/25/14 06:51 PM

Quote
Yepper. For you **22R** Weber-heads out there. Here's your archival thread, or better yet, write an article for the 4x4portal!!

http://www.4x4wire.com/index.php?op...w=section&id=3&Itemid=74


Yes I know, an old thread. But the above link seems to no longer work:

Quote

404
View not found [name, type, prefix]: section, html, contentView
Oh My Gosh! You Found It!!!
Looks like the page you're trying to visit doesn't exist.


Is there an updated location?
Posted By: ArbitraryNotion

Re: Weber 22R Carb Tech - 11/26/14 05:26 PM

Good Morning smile

Any specific questions? I rebuilt my 38dges on Sunday.

Josh
Posted By: 4Crawler

Re: Weber 22R Carb Tech - 11/27/14 04:23 AM

Just had someone ask me a Weber carb question and I referred them to this thread, but the main link seems to be dead. If there is an updated location, would be good to add to the thread.
Posted By: ArbitraryNotion

Re: Weber 22R Carb Tech - 04/18/15 12:19 AM

Still alot of good info on:

http://www.racetep.com/webtechpage.html

It's also where I bought my kit <img src="/forums/images/graemlins/cheers.gif" alt="" />
Posted By: Lha1988

Re: Weber 22R Carb Tech - 01/27/17 05:22 PM

I got my Weber after considering a manifold for 4 Mikuni carbs which I just happen to have from my hobby of rebuilding motorcycles. I had an old Alfa Romeo that had been altered for 4 Webers,and it was a pain to synchronize them. The Weber works great and gets better gas mileage.
Posted By: ZeroG

Re: Weber 22R Carb Tech - 06/26/17 09:02 PM

Electric fuel pumps push better than they pull. Mount pump near the tank down on its level, the gravity siphon will help fuel flow.
© 2020 4x4Wire TrailTalk