4x4Wire TrailTalk

Gen 2 AC Pulley Bearing

Posted By: Lesharoturbo

Gen 2 AC Pulley Bearing - 09/14/13 08:48 PM

For those who are interested, it is available via Bearings Direct.com

Part # 30BGS10DST2
Posted By: MrJeebs

Re: Gen 2 AC Pulley Bearing - 09/27/13 01:54 AM

Quote
For those who are interested, it is available via Bearings Direct.com

Part # 30BGS10DST2


Excellent! Thank you sir! I will be needing to do mine very soon...

May I ask, did you do the job yourself, or did you take it somewhere. If you did it yourself, would you mind sharing how it went for you?

<img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />
Posted By: pcc

Re: Gen 2 AC Pulley Bearing - 09/27/13 08:40 PM

Quote
If you did it yourself, would you mind sharing how it went for you?


I can't speak for Lesharoturbo, but I disassembled and reassembled mine with new seals. It was not hard at all. Did not do the bearing as it was OK. The bearing may need to be pressed out/in?
Posted By: Lesharoturbo

Re: Gen 2 AC Pulley Bearing - 09/28/13 06:16 PM

The pulley bearing is real easy to replace, about 10 minutes tops. The hard part is getting the AC clutch off with the fan installed. My pulley came off with a few taps of a rubber mallet. Press out the old and press in the new or bang it out and tap in the new one like I did. <img src="/forums/images/graemlins/lol.gif" alt="" />
© 2022 4x4Wire TrailTalk