4x4Wire TrailTalk

doubler for t case (has anyone fitted a samurai transfer?)

Posted By: hadtomer

doubler for t case (has anyone fitted a samurai transfer?) - 07/14/12 05:13 PM

Hello. has anyone attempted fitting a doubler (2 transfer cases) or a transfer case from another vehicle? i do recall someone here writing that he fitted a suzuki samurai transfer case with a reduction kit. (bare in mind- this takes some serious work. a transfer case from another vehicle is not compatible-checked and double checked that issue).
Posted By: Everet

Re: doubler for t case (has anyone fitted a samurai transfer?) - 07/15/12 01:15 AM

Haven't heard of anyone doing a doubler. There is a 3:1 transfer case mod that has been done 1 time. I asked but could not get any specs on it.

Keep us posted on your search.

Everet <img src="/forums/images/graemlins/patriot.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />
Posted By: DennisThompson

Re: doubler for t case (has anyone fitted a samurai transfer?) - 07/15/12 05:54 AM

I think it was a Sidekick t-case not a Samurai, the Sammy has a right side output front and rear I believe. If I remember right they used the Sidekick auto trans tail shaft on the Kia auto trans to use the Sidekick t-case.

Dennis
© 2021 4x4Wire TrailTalk