|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
| http://www.4x4wire.com/mitsubishi/projects/ | Short Cuts | ||||
|
|
|
||||
| Current Projects |
 |
Budget lift - Part II: Putting Extended Shackles on a GenI Montero After cranking the torsion bars, Ahren Cahoon was not happy with his truck's height - it sat higher in the front than in the back. After some research, he found out that he could use Toyota shackles to achieve his goal of levelling out the back. |
 |
Project Frontend, Part III: Idler Arm Replacement In the final chapter of Project Frontend, we replace the idler arm of our 89 Raider, and get rid of the excess play that has plagued this vehicle's steering from the beginning. |
 |
Beefier Bumper Don Huysmans further improves his truck's ruggedness this month, as he builds his own custom, rock-bashing bumper for his 87 SWB. He even includes a blueprint, so you can DIY! |
 |
Montero Frame Restoration So you've got a frame that is looking like its been floating in The Great Salt Lake? Or, it's just starting to get some serious Rust spots? Whatever your reason for looking into stabilizing the rust on your frame, here is how Terry Beever did it and what he learned not to do. |
 |
Budget Lift! So you went ahead and cranked the torsion bars...Want to level out the rear end of your coil sprung SWB Montero, without springing a lot of $$? Read on, and discover how recycled parts from a newer montero can help breathe life into your old one! |
| Project Archives |
|
| | 4X4Wire Portal | About 4x4Wire | Search 4x4Wire | TrailTalk Forums | Advertiser's Guide | |
