4x4Wire

About you, your 4x4 and access
John Stewart

They will let you down...

b2ap3_thumbnail_staun-deflators.png

A timeless ritual for every 4-wheeler when leaving pavement is a brief stop to lower tire pressure for traction advantage and reduced tire spin. Over the years, many products have come along that promise to make it easier and quicker to achieve the desired tire air pressure.

The removal of valve stems (and frequent loss of said valve stem) gave way to hoses that could be clamped onto the valve and deflate two tires are once while keeping a balanced tire pressure.

Having tried all methods, I was a little skeptical when I tried the Staun Tyre Delators. Made in Australia, the deflators screw onto the valve stem and begin letting air out. And, they do know when to quit letting air out -- provided you adjust them.

The deflators are adjustable (from 6-30 psi).From the package, they are pre-set to 18 psi.Set up is easy and should be done prior to your first use.

Step one is to set one tire to your desired off-road tire pressure.The deflator has a knurled lock ring.Loosen that ring.Screw the deflator onto the valve stem and adjust the cap until the deflator pops open.Remove the deflator and tighten the knurled locking ring.

Continue reading
Tags:
  11299 Hits
4x4Wire.com

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.